[time-nuts] Lady Heather for a noob

brent evers brent.evers at gmail.com
Thu Jan 12 22:57:50 EST 2012


To original poster - go to bed, let it sit and see what you have
tomorrow.  Chances are it will be locked on 8 birds and settled down.
I found the KE5FX remote link very useful as a reference system in
learning about LH.  I think I hosed up that machine pretty good in the
learning process too (sorry to all).

Hijacked thread.  Yes - this would be great to see done on a linux
machine.  I don't know that much about LH, but something done cross
platform (PyQt or such - could make binaries for win, linux, and mac)
in a  server/client config would be great.  I don't know much about
NTP other than pointing machines to NTP servers for time, but having
the server side provide also be an NTP server would be the cats ass
for me.  Pretty big wish list for someone who can't write code out of
a wet paper bag huh?

Brent

On Thu, Jan 12, 2012 at 10:47 PM, Chris Albertson
<albertson.chris at gmail.com> wrote:
> For normal use all you need to do is apply power.  You don't need to
> connect a computer at all.  The t-bolt will figure out it's location
> and be up and running in maybe an hour.
>
> LH is for the "next step" where you care about fine running.  Now it's
> maybe better to just let it run
>
> Sounds like you might have a marginal antenna.  It really does need a
> good view of the sky and the self survey is not useful if the antenna
> can move, so at least duct tape it down.  A mast is better.
>
> Have to read the "Thunderbolt book"
> http://www.trimble.com/support_trl.asp?pt=Thunderbolt®%20GPS%20Disciplined%20Clock&Nav=Collection-2357
> the monitor program at the above link is less complex and a good way
> to get started.
>
>
> Now,  to hijack this thread.   Do people think a "server" version of
> LH that does NOT need Windows would be usefull.  Sames a water to have
> to find a Windows PC just for this one task.   The server could run on
> a very low-power computer and push data onto the network.   For
> example I have the t-bolt running an NTP server and I'd like to run
> the LH server on the same computer
>
>
> On Thu, Jan 12, 2012 at 7:24 PM, Peter Gottlieb <nerd at verizon.net> wrote:
>> Alright, I took the plunge and got a Thunderbolt and installed Lady Heather
>> 3.00.
>>
>> So, it first didn't seem to want to grab satellites, probably because it had
>> a position set in it of 23.1019557 113.2662616 which looks to be a tall
>> building in China.  I used Google Earth to get a lat/long which was as
>> accurate as I could make it and put those in.  That gained me 4 good and 4
>> marginal satellites and phase lock.
>>
>> What should I do next?  Should I have it do its own survey?  Do I need to
>> change any settings from default?  Do those readings, or some others, tell
>> me when I'm fully up and synchronized?  Is there a faq on how to do this
>> that someone could point me to?
>>
>> Any help would be much appreciated!
>> Peter
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>
>
> --
>
> Chris Albertson
> Redondo Beach, California
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the time-nuts mailing list