[time-nuts] HP-5065a advise and purchase decision

[Ron Ward]

Hi:
Okay thank you for the information.
Ron

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Bob Camp
Sent: Tuesday, July 03, 2012 4:08 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] HP-5065a advise and purchase decision

Hi

The cells only fail if you drop and break them. The lamps can wear out,
but generally don't. The lamps can be found. The power transformer in
any of these old beasts is the part that I worry about. Both HP and Tek
used very conservative design rules on their transformers, they normally
last a long time.

Bob

On Jul 3, 2012, at 3:02 AM, Ron Ward wrote:

> Hi, I am new here.
> Are the Rubidium cell AND Rubidium Lamp still available either from
> HP/Agilant or another source? I am thinking of buying a HP-5065A and
it
> would be nice if these critical parts were still available!
> Thanks,
> Ron
> 
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
On
> Behalf Of Bob Camp
> Sent: Monday, July 02, 2012 12:48 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] HP-5065a advise and purchase decision
> 
> Hi
> 
> Yes, I have poked at the early ones (1980's). They are the only thing
I
> have seen that will beat the HP 5065. There is also a lot of published
> data on them.
> 
> Bob
> 
> On Jul 1, 2012, at 5:43 PM, bg at lysator.liu.se wrote:
> 
>> Tom,
>> 
>>> Chris,
>>> 
>>> The HP 5065A is one of the best Rb ever made.
>>> 
>>> /tvb (iPhone4)
>> 
>> Have you or any other list member had the opportunity to take
> measurements
>> on the ElmerPerkin/EG&G Space rubidiums (in a lab environment)?
>> 
>> http://www.excelitas.com/Downloads/DTS_Frequency_Standards_RAFS.pdf
>> 
>> --
>> 
>>  Björn
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.