[time-nuts] HP 10811 Tuning Diode
n1hac at Alum.Dartmouth.ORG
Thu Oct 18 16:46:33 EDT 2012
That would be a Motorola MV1650 or equivalent. You may have to select
for 100pf +/- 5% @ 4V as the standard spec is 10% but it probably does
not matter as the tuning ratio will be greater than the >2 spec.
On 10/18/12 3:18 PM, Adrian wrote:
> I found the 10811 in my 8662A to be quite noisy and was able to trace
> the problem down to the tuning diode.
> Actually, the phase noise started to jump when the oven heated up. As
> a quick solution, I replaced it with a SMD type that I had at hands.
> I would appreciate any hint where to find an original diode (even
> though I could leave it as is).
> As by the manual, the original is a '0122-0244 DIODE-VVC 100PF 5%
> C4/C25-MIN=2 BVR-30V Mfr. 28480'
> Mfr. 28480 is listed as HP, but the diode is marked 'M' for Motorola
> and '0244' and '312'.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts