[time-nuts] GPSDO vs Rb standard
Bob Stewart
bob at evoria.net
Fri Sep 20 21:25:45 UTC 2013
Bob,
Does your Rb send the serial out on the DB-9, or did you solder in a connection? I'm looking at mine and it looks like pin 8 is connected to something and pin 9 seems to come in to an empty SMT slot for a cap or resistor. I was thinking of bringing a ribbon cable out between the covers above the DB-9, but maybe I should just take over 2 pins on the DB-9? Any ideas what the pins 8 and 9 would have been hooked up to if they don't go to the serial input?
Bob
>________________________________
> From: Bob Camp <lists at rtty.us>
>To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Sent: Wednesday, September 18, 2013 7:25 PM
>Subject: Re: [time-nuts] GPSDO vs Rb standard
>
>
>Hi
>
>When I want to tune an Rb, I just hook up to it with a terminal program and hack away at it. There's not a lot to the protocol.
>
>Bob
>
>
More information about the Time-nuts_lists.febo.com
mailing list