[time-nuts] HP 5300B - HP 5308A Counter Time Base Question...
Tom Miller
tmiller11147 at verizon.net
Sat Nov 1 19:45:22 UTC 2014
Hi Bert,
The service manual for the 5300B is on the keysight.com site under manuals.
http://www.keysight.com/main/techSupport.jspx?searchT=5300B&id=5300B:epsg:pro&pageMode=OV&pid=5300B:epsg:pro&cc=US&lc=eng
Do you have a frequency reference (house standard) that you can use to
adjust the reference in the counter? See the manual.
Regards,
Tom
----- Original Message -----
From: "Burt I. Weiner" <biwa at att.net>
To: <time-nuts at febo.com>
Sent: Saturday, November 01, 2014 3:19 PM
Subject: [time-nuts] HP 5300B - HP 5308A Counter Time Base Question...
>I was recently given a HP-5300B / 5308A counter. I thought it might be
>handy when I'm at an AM broadcast transmitter and needed to make "rough"
>frequency measurements. It turns out that at 1000 kHz it reads about 4.5
>Hz high. Looking inside I'm not sure if there's a time base adjustment. I
>looked at the on-line manuals available and I don't find any reference to
>adjusting the time base frequency. Does anyone here know anything about
>these counters? Is there a schematic available? I'm not looking for
>precision, but 4.5 Hz at 1 MHz seems a tad much.
>
> Burt, K6OQK
>
> Burt I. Weiner Associates
> Broadcast Technical Services
> Glendale, California U.S.A.
> biwa at att.net
> www.biwa.cc
> K6OQK
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list