[time-nuts] 5>10 doubler

[Bruce Griffiths]

Not a good idea to use a bandpass filter even a crystal filter as such a filter has a relatively large phase shift tempco.The flicker phase noise of the filter crystal will degrade the output signal flicker phase noise significantly.Another issue is that the maximum crystal current will limit the maximum signal input to the crystal filter and thus degrade the output phase noise floor over that achievable using other approaches.

Bruce
 

     On Wednesday, 28 January 2015 11:19 PM, Alberto di Bene <dibene at usa.net> wrote:
   

 On 1/27/2015 11:57 PM, Bruce Griffiths wrote:

> /The only viable solution is to use better filtering of the output of a switching multiplier./

What about filtering the doubler output with a 10 MHz xtal ?

73  Alberto  I2PHD



---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.