[time-nuts] Anyone (ideally in the UK) got a spare rotary knob for the 5370B TI counter?

[Dr. David Kirkby - Kirkby Microwave Ltd]

I bought a 5370B TI counter which arrived today. It needs a bit of TLC, but 
nothing too bad. But one of the rotary knobs is incomplete. Does anyone have a 
spare knob? Contact me off list if you do.

I had one of these things about 10 years ago. I have forgotten how to drive it.

It is running very warm. I can hold my fingers on the heatsink for only a couple 
of seconds - not a very scientific test I must admit.

Obviously the mains voltage varies a bit, but it is usually well over the 230 
VAC we are supposed to be. I just measured it at 248 VAC. Unfortunately I'm 
right on top of the 11 kV transformer, so other properties around me probably 
get poorer voltage regulation, but a few less volts.


Dave


-- 
Dr. David Kirkby Ph.D CEng MIET
Kirkby Microwave Ltd
Registered office: Stokes Hall Lodge, Burnham Rd, Althorne, Essex, CM3 6DT, UK.
Registered in England and Wales, company number 08914892.
http://www.kirkbymicrowave.co.uk/
Tel: 07910 441670 / +44 7910 441670 (0900 to 2100 GMT only please)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: knob.jpg
Type: image/jpeg
Size: 104689 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20161230/69da6eb3/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: drkirkby.vcf
Type: text/x-vcard
Size: 4 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20161230/69da6eb3/attachment.vcf>