[time-nuts] Using 5335 frequency counter for timing

[Bob kb8tq]

Hi

The 53131 and 53132 will get you more resolution. The TICC, the 5370, and the SR620 will do even better. None
of them will do as well as a really fast scope.

Bob

> On May 7, 2017, at 8:52 PM, Jerry Hancock <jerry at hanler.com> wrote:
> 
> I was showing my son how we could measure the difference in cable lengths by using the velocity of light and cable velocity factor.  I used a scope to measure the offset and was then thinking the 5335 could do it more accurately, but I was wrong, as it only reports to the nanosecond.  I thought I had seen somewhere where people were getting higher resolution using software along with the 5335, no?
> 
> Thanks
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.