[time-nuts] True position unlocking
Bob kb8tq
kb8tq at n1k.org
Thu Apr 11 12:33:51 UTC 2019
Hi
If there is no documentation on the protocol the boards are sending, then anything you see on a screen is
a guess. The unit may be saying “survey in mode 3” and that gets guessed as “unlocked”. Without a
protocol definition, this gets really crazy.
Bob
> On Apr 11, 2019, at 3:22 AM, Taka Kamiya via time-nuts <time-nuts at lists.febo.com> wrote:
>
> Not knowing if what I am seeing is normal or not is hard to accept. Housekeeping "hold" does sound feasible, although why showing up as unlocked is a mystery. I also don't know what I'm seeing really is unlocked status. Graph shows red bar, status says "normal". Huh?
>
> ---------------------------------------
> (Mr.) Taka Kamiya
> I'm stuck in a wormhole.... Hello, worms!
>
> On Thursday, April 11, 2019, 2:04:34 AM EDT, Mark Sims <holrum at hotmail.com> wrote:
>
> Unless you have a really crappy antenna setup, I doubt it is a signal level problem.
>
> These receivers do like to do the "holdover" thing. No telling if those are real holdovers, though... no documentation. It could be that the device is going into some house-keeping mode... who knows?
>
> Also try to force a self-survey (SS keyboard command).
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list