[time-nuts] TAPR TIC Upgrade?

[John Ackermann N8UR]

In theory, making a new TICC that ran on an RPi could provide
significantly more measurements per second, and more convenient I/O, but
wouldn't affect the quality of the results.

I've thought a bit about an RPi-based TICC, but it's a significant
redesign effort for limited gains.

John
----

On 8/14/19 3:18 PM, Forrest Christian (List Account) wrote:
> The TICC uses an Arduino mega clone, not a Raspberry Pi.
> 
> My understanding is that most of the magic happens on the shield board not
> in the processor - the processor is just there to capture the data from the
> shield and format and report it via the serial port.
> 
> On Wed, Aug 14, 2019 at 12:10 PM Perry Sandeen via time-nuts <
> time-nuts at lists.febo.com> wrote:
> 
>> Yo Bubba Dudes!,
>> I've just purchased a TAPR TIC module.  Now the new Raspberry Pi Model B
>> has just been released.
>> So my question is would there be any worthwhile advantage to replacing the
>> TAPR unit with the new Model 4B?
>> Regards,
>> Perrier
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
> 
>