[time-nuts] TAPR TIC Upgrade?

[Taka Kamiya]

I've almost done that, except not with pi, but a whole PC (Lenovo Tiny windows 10 box) and a touch screen display.  Heck, throw in Rubidium, too.  Then re-thought about it.  I could end up with a giant headache to sort out packing all that noise and heat generating component into one case.  Right now, in 2U case, only TICC sits.

--------------------------------------- 
(Mr.) Taka Kamiya
KB4EMF / ex JF2DKG
 

    On Wednesday, August 14, 2019, 11:18:37 PM EDT, djl <djl at montana.com> wrote:  
 
 Would require a real time operating system on the Pi?

On 2019-08-14 16:16, Bob kb8tq wrote:
> Hi
> 
> Could you? Sure you could.
> 
> Should you? How much do you feel like rewriting all the driver
> software from scratch?
> Do you really want to rewire things to fit to the Raspberry pinout?
> That’s either a fairly
> simple PCB or a whole bunch of wires.
> 
> The main benefits would be the bigger RAM on the 4B and the ethernet
> port. If you went
> crazy, you could put a display and buttons on it and have an “all in
> one” instrument.
> 
> Probably easier to leave the Arduino where it is and mate up the 4B
> with the serial port
> on the Arduino.
> 
> Bob
> 
>> On Aug 14, 2019, at 1:28 PM, Perry Sandeen via time-nuts 
>> <time-nuts at lists.febo.com> wrote:
>> 
>> Yo Bubba Dudes!,
>> I've just purchased a TAPR TIC module.  Now the new Raspberry Pi Model 
>> B has just been released.
>> So my question is would there be any worthwhile advantage to replacing 
>> the TAPR unit with the new Model 4B?
>> Regards,
>> Perrier
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to 
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.

-- 
Dr. Don Latham  AJ7LL
PO Box 404, Frenchtown, MT, 59834
VOX: 406-626-4304


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.