[time-nuts] Synchronization
Bob kb8tq
kb8tq at n1k.org
Thu Dec 5 13:16:19 UTC 2019
Hi
One timing issue could be that USB is not that great for timing. Since it is
packet based it introduces jitter in the link. Running NTP on a “traditional”
RPi is unlikely to produce numbers below a milisecond.
Indeed I’m digging into that for what I’m working on …..
Bob
> On Dec 5, 2019, at 12:09 AM, Anton Strydom <agstrydom at gmail.com> wrote:
>
> Good day Hal
>
> Thank you for your contribution
>
> The physical setup is as follows, each Rp1 has 2 or more cameras attached
> to it via a multiplexer or usb depending on the camera, there are a number
> of V2 RPi and also a couple of USB cameras attached to some of the RPi's.
> All the equipment is powered by solar
>
> I will be able to run cable but it is going to be difficult plus the
> possibility that the cables and equipment attached to it will be stolen is
> 100% hence the WiFi
>
> Yours sincerely
>
> Anton
>
>
>
> On Thu, Dec 5, 2019 at 3:01 AM Hal Murray <hmurray at megapathdsl.net> wrote:
>
>>
>> agstrydom at gmail.com said:
>>> The cameras are pairs sitting on a multiplexer so the problem is not the
>>> camera pair synchronization but the RPi synchronization
>>
>> I don't understand the physical setup. Is it possible to run a cable to
>> wherever you need good time?
>>
>> Even if that isn't practical in the long run, it might be useful for
>> experimenting.
>>
>>
>> --
>> These are my opinions. I hate spam.
>>
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at lists.febo.com
>> To unsubscribe, go to
>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list