[time-nuts] Trimble 57963
Roger Tilsley
j.r.tilsley at runbox.com
Wed Dec 11 00:38:02 UTC 2019
Greetings Robert,
I have one of these and it works very well running on 6 V. I have been warned off low operating voltage OCXOs by an OCXO manufacturer. This manufacturer would not countenance manufacturing OCXOs operating on 5 V. There is little technical information available, I tried Trimble for info and was told that it was designed for a specific customer and that all the information was customer confidential - if I had paid a contractor a substantial sum to produce a specific design for me, I would not be happy if the manufacturer sent technical details to anyone who enquired! I can therefore understand the policy and it does explain the shortage of technical information.
Regards,
Roger T.
On Tue, 10 Dec 2019 09:43:23 -0500, Robert DiRosario <ka3zyx at comcast.net> wrote:
> I just received an Trimble 57963-D GPSDO with a Trimble 73090 OCXO.
>
> There is very little information about this on the web. What voltage
> does this run on?
>
> Some information I found online says 6 volts. The seller says 5.5V. I
> got it from ebay / China.
>
> I did get a breakout board and the 50 pin cable. \
>
> Thanks
> Robert
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list