[time-nuts] 10MHz, distribution amplifier.

[Didier Juges]

I do not see any transformer in the outputs. Common mode noise is never
your friend in any kind of distribution amplifier. That would be my biggest
complaint.
Otherwise it looks each output has its own filter but there are two outputs
per amplifier, so isolation may not be great between shared outputs.
For general RF lab use where you need to share a frequency reference for
things like a signal generator, a counter and a spectrum analyzer, it looks
like there is enough hardware to do a decent job but the more time-nutty
among us may find much to complain about :)

Didier KO4BB

On Tue, Dec 24, 2019 at 2:00 PM <xaos at darksmile.net> wrote:

> Hello everyone and sorry if this has been asked before.
>
> Has anyone tested one of these units ?
>
>
> https://www.ebay.com/itm/10MHz-Distribution-amplifier-frequency-divider-clock-divider-8-port-output/182638021799?hash=item2a86130ca7:g:nIUAAOSwyWZZUL1K
>
> The price is right. But how does it compare with a Symmetricom 58502A,
> which is also on sale at eBay ?
>
> Thanks,
>
> George N2FGX
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>