[time-nuts] Tymserve 2000 request for help

[Mark Spencer]

Hi:

Although I forget the exact error message mine displayed, I needed to pull the card (or cards ?) out of their slot (or slots ?) on the mother board and carefully re seat them in the slots on the mother board in order to get my used unit to work after it was delivered.   

Good luck.

Mark Spencer

mark at alignedsolutions.com
604 762 4099

> On Jul 4, 2019, at 12:36 PM, Francis Grosz <fgrosz at otiengineering.com> wrote:
> 
> At a recent hamfest I picked up a Datum Tymserve 2000 Network
> Time Server with the GPS receiver.  Unfortunately when I power
> it up the screen displays "Booting System, Please Wait..." and
> nothing else happens; it displays that for as long as I leave
> it on.  The keypad is inactive.  I downloaded the manual but
> can't find anything helpful there.  Does anyone with any
> experience with these devices have any ideas as to what is
> wrong or how it might be corrected, or know if there is a
> service manual with schematics?  Thanks in advance for any
> help!
> 
>       Francis Grosz
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>