[time-nuts] Switching 1 pps signal
Taka Kamiya
tkamiya9 at yahoo.com
Sun Jul 7 04:02:13 UTC 2019
---------------------------------------
(Mr.) Taka Kamiya
KB4EMF / ex JF2DKG
On Sunday, July 7, 2019, 12:00:52 AM EDT, Glen English VK1XX <glenlist at pacificmedia.com.au> wrote:
Hal, Good point.
and I have never seen a spec for phase stability for Cat-7 cable !
for RG58, OR OTHER polyethylene, might be up to 150ppm /deg C. maybe as
good as 10 ppm/deg C for some LMR.
With 1000 feet of cable might be an issue for fine stuff. a few nano
seconds each way over temperature might not matter for his project...
I forget it is not a microwave RF VNA application. Easy to resolve
anyway with a difference balance term somewhere.
g
On 7/07/2019 11:23 AM, Hal Murray wrote:
>> coax cables are in general NOT PHASE STABLE with temperature, either.
> Is twisted pair any better?
>
>
>
_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list