[time-nuts] LMU300 Connectors

[Richard Solomon]

I would have expected a sticker somewhere, but nothing found.
I'll hit it with 28vdc and see if any "Magic Smoke" issues forth.

73, Dick, W1KSZ

Sent from Outlook<http://aka.ms/weboutlook>
________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Hal Murray <hmurray at megapathdsl.net>
Sent: Thursday, March 14, 2019 10:12 PM
To: Discussion of precise time and frequency measurement
Cc: hmurray at megapathdsl.net
Subject: Re: [time-nuts] LMU300 Connectors


> The outside of the box specs current need at 24vdc and 48vdc. Does the Power
> Supply recognize the voltage level or do I need to dig into it further ?

There is a large collection of DC-DC converters available.  A 2:1 range on the
input voltage is common, but they usually are centered on 24V or 48V rather
than spanning 24-48V.

I'd expect a sticker next to the power input connector telling you which
voltage it expects.


--
These are my opinions.  I hate spam.




_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.