[time-nuts] 5 Mhz to 10 Mhz and 25 Mhz

[Dave B]

On 10/09/2019 17:00, time-nuts-request at lists.febo.com wrote:
> Re: [time-nuts] 5 Mhz to 10 Mhz and 25 Mhz

Why not just create a comb of frequencies based on the 5 MHz input, then
filter and extract the 10 and 25 MHz signals you want, amplify and
distribute as needed?  Going the PLL route seems like a large hammer to
crack a small nut.

Unless you want a free-running signal if the incoming 5 MHz vanishes...

Dave G0WBX.


-- 
Created on and sent from a Unix like PC running and using free and open source software: