[time-nuts] Wall Clock that takes 1PPS input

[xaos]

Jerry,

The Chinese NTP server that I've been discussing here lately has outputs 
for 1PPS, 1PPM and 1PPH.

The plain vanilla NTP server (no 10MHz.) goes for 150-200.

George, N2FGX

On 1/2/2020 13:21, Jerry Hancock wrote:
> Hello,
>
> I looked around but can’t find a wall clock that would take a 1PPS input signal to drive the minutes and seconds.  I’ve made digital modules using a lot of different displays but would love to have a large, 14” or so with a second hand, wall clock that I can drive with 1PPS.  The old IBM clocks, etc I found take a pulse on the minute.  I have an old pendulum clock I can drive with a solenoid but thought I would ask here before going that route.
>
> Signal levels aren’t important.
>
> Thanks
>
> Jerry
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.