[time-nuts] thunerbolt, 2 problems

[Bill Beam]

Brian,
LH can do this.  Issue the command "p" to bring up the PPS control menu.

On Thu, 16 Jan 2020 20:44:43 -0600, Brian Lloyd wrote:

>After quite some time I dragged out my Tbolt and fired it up. Comes up
>OK. Lady Heather is happy. 10MHz is spot on (after an hour or so).
>Problem is, 1pps is missing. 1pps is enabled (or appears to be).
>Suggestions?

>I am running Trimble Visual Timing Studio 2.03.12. It seems to know
>about the Thunderbolt-E but not the original thunderbolt. Not sure it
>will do the right thing. Does anyone have an older copy of the program
>for configuring the T-bolt?

>Thanks in advance.

>-- 


>n++ <https://www.lloyd.aero>

>Brian Lloyd
>706 Flightline
>Spring Branch, TX 78070
>brian at lloyd.aero <mailto://brian@lloyd.aero>
>+1.210.802.8359


>_______________________________________________
>time-nuts mailing list -- time-nuts at lists.febo.com
>To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>and follow the instructions there.


Bill Beam
NL7F