[time-nuts] Looking for HP GPS splitter board

[Art Sepin]

Hi John,

Many years ago we supplied a number of these HP 2 and 4 channel PC assemblies to TAPR. I believe that Steve Bible also received some of these directly from us.

Art


-----Original Message-----
From: time-nuts <time-nuts-bounces at lists.febo.com> On Behalf Of John Ackermann N8UR
Sent: Thursday, January 30, 2020 7:52 AM
To: Discussion of precise time and frequency measurement <time-nuts at lists.febo.com>
Subject: [time-nuts] Looking for HP GPS splitter board

This is a long shot, but...

A long while ago TAPR obtained and then sold some printed circuit boards that were intended to go into HP GPS antenna splitters.

The boards were about 1.5 by 3.5 inches and had all the parts mounted for a 4 port splitter, but with no connectors attached.  The part number on the board was 58516-60001, Rev. G.

I would dearly like to find one or two of these boards to use in a project.  If anyone has any they are willing to sell, please contact me off list.

Thanks!
John
jra at febo dot com


_______________________________________________
time-nuts mailing list -- time-nuts at lists.febo.com To unsubscribe, go to https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.febo.com%2Fmailman%2Flistinfo%2Ftime-nuts_lists.febo.com&data=01%7C01%7Cart%40synergy-gps.com%7Caf397685a3dc41edfc8608d7a59c700c%7Cc81f9fdec0e04d8c95779afaa0cad9ed%7C1&sdata=5ZBwRq%2FilMSHT273fO7Z5Jy4JdGb9UNI3%2FERtw9yRFg%3D&reserved=0
and follow the instructions there.