[time-nuts] Spectracom 8131 Repair information

[Bryan _]

perhaps upload to the Ko4BB site for all to access. I can do so if you would like

http://www.ko4bb.com/getsimple/index.php?id=manuals


-=Bryan=-

________________________________
From: time-nuts <time-nuts-bounces at lists.febo.com> on behalf of Byron Hayes Jr <bhayes at earthlink.net>
Sent: May 7, 2020 3:25 PM
To: Claude Houde <va2hdd at aei.ca>; Precise time and frequency measurement <time-nuts at lists.febo.com>
Subject: Re: [time-nuts] Spectracom 8131 Repair information

Claude,

I also have two Spectracom 8131s, one working and one not working, so I contacted the new parent company, Orolia, in March, 2019, and a very nice support person was able to find me the manual for the 8131, which is attached.  I am sending this to the group, in case someone else needs this manual.

Byron, WA6ATN

At 12:39 PM 5/7/2020, Claude Houde wrote:
>Good day.
>
>I'm repairing a Spectracom 8131 and I believe that the OCXO is dead.
>
>In the Spectracom website they have the 8130 manual, and there is too much difference between these two instruments to be useful.
>
>I searched in all the usual places to get the service manual for the 8131 and either a catalogue or a data sheet for the OCXO, which is an Ovenaire OSC 42-15.
>
>If you have any information I would be very happy !
>
>Best regards,
>
>Claude VA2 HDD
>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at lists.febo.com
>To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
>and follow the instructions there.