[time-nuts] Teensy 4.1

[Philip Gladstone]

I like the look of the 4.1 especially once they sell the Ethernet kit. I'll
port my NTP/PTP server over to it as it is a lot smaller (and cheaper) than
the current board that I'm using. Happily the Teensy is supported by
ChibiOS which is the OS that I used before.....

Philip

On Thu, May 14, 2020 at 7:35 PM Didier Juges <shalimr9 at gmail.com> wrote:

> I just got a Teensy 4.0, OSHPark edition (it was $18 when I bought a set of
> boards a couple of weeks ago).
> I have not done anything with it yet but I am looking forward to.
> I have not looked at the differences with the 4.1.
>
> Didier KO4BB
>
> On Thu, May 14, 2020, 5:15 PM Adrian Godwin <artgodwin at gmail.com> wrote:
>
> > I just saw an update to the Teensy microcontroller line.
> > Teensys are somewhat like an arduino but generally with faster processors
> > and more memory.
> >
> > The latest one, 4.1, has an ethernet interface with IEEE1588
> > packet timestamping.
> >
> > https://www.pjrc.com/category/news/
> >
> > I'm not on pjrc's staff etc, but I like his products and as far as I know
> > this is a 'first' for such an interface on a cheap, fast development
> board
> > ($26, 600MHz).
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at lists.febo.com
> > To unsubscribe, go to
> > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>