[time-nuts] UBlox F9T and Lady Heather

[Bob kb8tq]

Hi

There is indeed a version of LH that *does* work just fine with the F9T and F9P parts. A year 
ago it was a beta …..

Bob

> On May 28, 2020, at 7:12 PM, Ben Hall <kd5byb at gmail.com> wrote:
> 
> On 5/28/2020 4:26 PM, Chris Burford wrote:
>> I too posted a similar issue with my F9P on the EEVBlog with the exact same
>> results as you are having. I still don't have an answer for the satellites
>> not showing up in LH.
> 
> Hi Chris,
> 
> I actually came across your post in my searching.  ;)
> 
> In an off-line conversation with Gary Miller, he noted that it may be possible that Lady Heather is unable to use the new UBX-NAV-SAT message that is used in the 9-series uBlox receivers...and that Heather is looking for the old UBX-NAV-SVINFO that cannot be enabled on the 9 series.
> 
> I've ensured that I've got UBX-NAV-SAT turned on...but still have no sats in the LH table.
> 
> Interestingly, I did an experiment where I forced the F9T into NMEA and forced LH into NMEA (/rxn) and was able to see the SAT table, but it didn't have a lot of the neat data present that you can get from an 8 series running UBX binary.
> 
> I'm scratching my head at this point - I came across several posts in my searching where folks noted that LH was working with the F9P and F9T.
> 
> I'll post back if I figure something out.
> 
> thanks much,
> ben, kd5byb
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.