[time-nuts] Frequency division by 81
Gilles Clement
clemgill at gmail.com
Fri Jun 19 10:09:30 UTC 2020
Thanks for all your replies.
Very interesting, A lot to digest.
Best,
GIlles.
Envoyé de mon iPad
> Le 19 juin 2020 à 01:12, Richard (Rick) Karlquist <richard at karlquist.com> a écrit :
>
>
>
>> On 6/18/2020 4:58 AM, Gilles Clement wrote:
>> Hi
>> I need to divide the output of an OCXO by a factor D=81 for testing purposes. So with minimum added phase noise.
>
> If you are using any kind of digital divider, let me
> recommend that you first condition the signal to be
> divided by using an ADI LTC6957-1 to convert a sine
> wave into a high slew rate square wave without a lot
> of added noise. If it is already a square wave, you
> still might want to pass it through a narrow bandpass
> filter to remove phase noise, and then turn it back
> into a square wave. All of this is almost more
> important than what you use to actually do the
> division itself.
>
> Rick N6RK
More information about the Time-nuts_lists.febo.com
mailing list