[time-nuts] Re: Datum/ET5390-6000 White Wire change for DT102E FW and bodge-wire

[Time-Nuts]

Hi -

You mention a '5390-6000' but that's not a model I'm familiar with. You did mention DT102E however, and I do have an image like that for the 9390-6000. 

You can grab it (along with DT101E and DT103E) from my Dropbox:
<https://www.dropbox.com/s/91y3qtcm124hvce/DATUM_9390-6000_GPSDO_EEPROM_FW.rar?dl=0>

I uploaded it to KO4BB.com, but you'll need to use the ftp access to grab it. It will take a bit for it to get migrated to the proper location on the site. (Unfortunately, I messed up the upload via the applet (sorry Didier!) and sent an empty file - oops!)

These are the images that I have - I am not 100% sure they are named correctly - I seem to remember using the DT103E image on my OCXO unit. They are currently in storage so I'm unable to check. So YMMV :)

I'm not aware of a bodge wire modification, but I'd like to hear more about it. What was it supposed to accomplish?

Hope that helps.

Paul - K9MR

June 15, 2023 5:39 PM, "Steve Uckerman via time-nuts" <time-nuts at lists.febo.com> wrote:

> Hi There!
> 
> After years collecting dust in storage, I've finally pulled my last
> 5390-6000 out of hibernation for use as a 10Mhz standard in the home
> shop/lab. Unfortunately, this unit was one that I hadn't completed the
> DT102E update, and I've since misplaced or misfiled the doc from Datum
> detailing the accompanying bodge-wire modification to the GPS mainboard..
> 
> I believe this eventually made it to a field bulletin.. Might someone on
> this list have a unit that is modified or have a copy of said bulletin?
> 
> Thanks in advance!
> 
> Steve N2JXL..
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe send an email to time-nuts-leave at lists.febo.com