[time-nuts] Primary Cesium Beam Frequency Standard FTS 4050. Got a problem with the beam.
Jason Rabel
jason at extremeoverclocking.com
Tue Jan 16 03:20:48 UTC 2007
The person "corbymite" on eBay might be able to help you:
http://members.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=corbymite
I'll have to dig through all my emails, I think I have it somewhere. But at
the very least you can contact him through eBay.
Jason
> Can anyone give me advise with the following:
>
> I have a Cesium Frequency Standard FTS 4050, that I powered
> up after it had
> been stored for years.
> It seams to work, but:
> The beam current is way too high.
> With monitor select on 3 (= beam current): the output on the
> meter is >5V.
> The lock is on and the output frequency is 9 999 999.2 Hz.
> The other readouts are:
> Setting Reading
> 1 = QZ oven 3.5V
> 2 = CS Oven 1.2V
> 3 = Beam current >5V
> 4 = Control voltage 2.4V
> 5 = Supply voltage 2.8V
>
> Any information on this would be appreciated.
> Thanks,
> Michel
More information about the Time-nuts_lists.febo.com
mailing list