[time-nuts] Prologix GPIB
Ulrich Bangert
df6jb at ulrich-bangert.de
Sun Jul 12 12:50:03 UTC 2009
Brian,
> terminal window. Stop the program and bring up Hyperterminal
> and start recording data....
and in case you need to perform something even sligthly more complex than
just listen to a talker on the bus then you are a candidate for EZGPIB.
Best regards
Ulrich Bangert
> -----Ursprungliche Nachricht-----
> Von: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com] Im Auftrag von Brian Kirby
> Gesendet: Sonntag, 12. Juli 2009 05:12
> An: precise time and frequency measurement
> Betreff: [time-nuts] Prologix GPIB
>
>
> I ordered a Prologix GPIB-USB controller and it has arrived.
> I got it
> up and going so fast, and I am very pleased to have a working
> solution
> for capturing data. I have tried several cheap adapters and
> they have
> not worked.
>
> In my case I needed a controller to record time interval data from my
> HP5370B. Many of us also use HP53131A and they have a easy
> serial port
> to configure. I also plan to use the Prologix adapter on my
> HP3456A and
> HPP3457A multimeters.
>
> You basically plug the controller into a PC and let WIndows
> XP install
> its USB drivers for the device. Then you install the FTDI
> drivers that
> you have to download. Then I used John Miles "Prologix.exe" program
> with the default configuration and I could see data coming in the
> terminal window. Stop the program and bring up Hyperterminal
> and start
> recording data.
>
> Brian KD4FM
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list