[time-nuts] low-loss cable

[bg at lysator.liu.se]

Hi Dick,

To get through windows without drilling och sawing, I found a very flat
"flex-cable", that you can close your window over.

    http://www.kjell.com/content/media/images/items/30161.jpg

It is probably mostly for people wanting to get a cable through to a sat
dish or outside TV antenna in apartment buildings.

It is probably 75ohm and has F-connectors, but for say a T-bolt you
already have a 75ohm F at the receiver.

--

   Björn

> Thanks all -- I got a Lucent bullet from i.fluke, +26dB gain. Replaces a
> Hawk patch with lower gain, but I want to run more cable (about 2X) to get
> the bullet higher in the air. The Hawk patch, which works very well
> signal-wise, has cable that's about 3 or 4mm in diameter and about 6m
> long. I've sawed out a part of a plastic window frame to get the cable
> inside. So I don't want any cable that's bigger than 0.25" d. and
> preferably smaller. Hope this clarification helps a bit.
>
> Best,
> Dick
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>