[time-nuts] HP Cesium Power Cords

[paul swed]

I have used the Galco connectors and they work well. Grab a new power cord
for nothing and cut the EIJ C14 side off and use that. That way the
connector and cord are brand new.
I find older cords tend to deteriorate after 30 years.
Regards
Paul
WB8TSL

On Mon, Nov 19, 2018 at 10:25 AM J. L. Trantham <jltran at att.net> wrote:

> If all you need is the connector, they are available from Galco.  The
> connector is:
>
> https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3106a18-22s
>
> or
>
> https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3106A18-22S-F
>
>
> The strain relief is:
>
> https://www.galco.com/buy/Fujikura-Formerly-DDK/dms3057-10a
>
> or
>
> https://www.galco.com/buy/Fujikura-Formerly-DDK/DMS3057-10A-F
>
>
> The first item in each category is green, the second is black.
>
> Hope this helps.
>
> Joe
>
>
>
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at lists.febo.com] On Behalf Of
> Donald E. Pauly
> Sent: Sunday, November 18, 2018 8:04 PM
> To: time-nuts at lists.febo.com; Donald E. Pauly
> Subject: [time-nuts] HP Cesium Power Cords
>
> For those needing hard to find power cords for HP cesium standards
> they can be found at https://www.ebay.com/itm/132858288506 .
> These cables are for 120 V ac 60 Hz power.
>
> While some HP5065A rubidium standards use the same power cord, not all
> do.  Beware and see http://leapsecond.com/museum/hp5065a/conn.htm .
> For some, you will need to change the order of three pins by
> resoldering. If you have a pin removal tool, you can merely move the
> pins. Perhaps the seller can accommodate you in this case.
>
> I have no information on cables for 240 V ac 60 Hz or 220 V ac 50 Hz
> at this time.  Contact me off list if you need these cables and I will
> research them.
>
> WB0KVV
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to
> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>