[time-nuts] Need help in test board pinout for SA22.c oscillator - thanks in advance
Bob kb8tq
kb8tq at n1k.org
Thu Nov 7 21:45:49 UTC 2019
Hi
You probably need more heat sinking than that assembly provides. It’s a case of “better to much
than to little”. The life of the device will extended with more heat sinking.
Bob
> On Nov 7, 2019, at 2:47 PM, Fio Cattaneo (.US) <fio at cattaneo.us> wrote:
>
> Hello folks, I just got a Symmetricom SA22.C oscillator on Ebay. The
> oscillator comes mounted on a test board which seems to drastically reduce
> the number of pins (I’m guessing it consolidates all the GND and VDD pins
> in one) and potentially obviating the need of providing both +15V and +5V
> (looks like there is a voltage regulator).
>
>
>
> However, I do not recognize the board (it’s definitely not the one shown in
> the SA22.C user manual), so I’m asking here…… Thanks much in advance !
>
>
>
>
>
>
>
>
>
>
>
> --- Fio Cattaneo
>
>
>
> Universal AC, can Entropy be reversed? -- "THERE IS AS YET INSUFFICIENT
> DATA FOR A MEANINGFUL ANSWER."
> <image001.png>_______________________________________________
> time-nuts mailing list -- time-nuts at lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list