October 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Oct 1 03:56:31 UTC 2022
Ending: Mon Oct 31 16:45:49 UTC 2022
Messages: 160

• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   AC0XU (Jim)
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   AC0XU (Jim)
• [time-nuts] Re: Ublox F9T tick to phase   Forrest Christian (List Account)
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   Carsten Andrich
• [time-nuts] SRS FS740 in action: Emitter localization of UAVs via distributed receivers   Carsten Andrich
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Carsten Andrich
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Carsten Andrich
• [time-nuts] Re: BOAT ionospheric effects   Dave B
• [time-nuts] Re: Stuff from Tom McCormicks estate   Tom Van Baak
• [time-nuts] Re: BOAT ionospheric effects   Tom Van Baak
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Tom Van Baak
• [time-nuts] Compairing the phase drifts between two PPS signals   Mayukh Bagchi
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   Mayukh Bagchi
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   Mayukh Bagchi
• [time-nuts] VECTRON FS-323   Eric Berty
• [time-nuts] Re: Dr Kinali   Martin Burnicki
• [time-nuts] Re: Phase Noise Measurement in Dallas   Chris Caudle
• [time-nuts] Re: Phase Noise Measurement in Dallas   Chris Caudle
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Magnus Danielson
• [time-nuts] Dr Kinali   Magnus Danielson
• [time-nuts] Re: Dr Kinali   Magnus Danielson
• [time-nuts] Re: Dr Kinali   Magnus Danielson
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Magnus Danielson
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Magnus Danielson
• [time-nuts] Re: Phase Noise Measurement in Dallas   Magnus Danielson
• [time-nuts] Re: Trimble Thunderbolt Error   Dennis C. Donah
• [time-nuts] Reducing time-interval noise with RNCAN PPP?   Marek DorÅ¡ic
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   Marek DorÅ¡ic
• [time-nuts] Profile on Dave Mills and NTP   Jeremy Elson
• [time-nuts] WNRO fixup   Thomas D. Erb
• [time-nuts] BOAT ionospheric effects   Phil Erickson
• [time-nuts] Re: BOAT ionospheric effects   Phil Erickson
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   Aiden Gibson
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good, {External}   Aiden Gibson
• [time-nuts] Re: BOAT   Michael Gindonis
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Joseph Gwinn
• [time-nuts] Re: Dr Kinali   Joseph Gwinn
• [time-nuts] Trimble Thunderbolt Error   Chris Hastreiter
• [time-nuts] Re: Trimble Thunderbolt Error   Chris Hastreiter
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Javier Herrero
• [time-nuts] Re: Oncore Still alive   Clint Jay
• [time-nuts] Re: BOAT   Graham / KE9H
• [time-nuts] Chasing the "BOAT"   Graham / KE9H
• [time-nuts] Re: Hybrid analog digital dual stage DMTD based on nanoVNA HW. First actual measurement results   Erik Kaashoek
• [time-nuts] Re: Hybrid analog digital dual stage DMTD based on nanoVNA HW. Getting closer to 1e-13 frequency resolution   Erik Kaashoek
• [time-nuts] Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Erik Kaashoek
• [time-nuts] 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Erik Kaashoek
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Erik Kaashoek
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Erik Kaashoek
• [time-nuts] What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Erik Kaashoek
• [time-nuts] Best method to convert phase measurements into frequency?   Erik Kaashoek
• [time-nuts] Re: BOAT ionospheric effects   Andrew Kalman
• [time-nuts] Re: BOAT ionospheric effects   Poul-Henning Kamp
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Poul-Henning Kamp
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Poul-Henning Kamp
• [time-nuts] CuriousMarc explains HP5061 Zeeman tuning   Poul-Henning Kamp
• [time-nuts] Re: Dr Kinali - The Thesis   Attila Kinali
• [time-nuts] Re: Dr Kinali   Dr. David Kirkby
• [time-nuts] Re: Dr Kinali   Steve Krull
• [time-nuts] Use of dual frequency GPS for NTP server and other purposes   Tim Lister
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Tim Lister
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Tim Lister
• [time-nuts] looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   Brian Lloyd
• [time-nuts] Re: looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   Brian Lloyd
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   Lux, Jim
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   Lux, Jim
• [time-nuts] Re: BOAT ionospheric effects   Lux, Jim
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Lux, Jim
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Lux, Jim
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Lux, Jim
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Lux, Jim
• [time-nuts] Ublox F9T tick to phase   Demetrios Matsakis
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   Greg Maxwell
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good, {External}   François Meyer
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   John Miles
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good, {External}   Jim Muehlberg
• [time-nuts] WNRO fixup   Hal Murray
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   John Ackermann N8UR
• [time-nuts] Re: Compairing the phase drifts between two PPS signals   John Ackermann N8UR
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   John Ackermann N8UR
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   John Ackermann N8UR
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   Bill Notfaded
• [time-nuts] Re: What time scale does IGS use to report its clock files?   Gabs Ricalde
• [time-nuts] Re: looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   John Sloan
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Todd Smith
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Todd Smith
• [time-nuts] Re: looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   Todd Smith
• [time-nuts] Oncore Still alive   Andy Talbot
• [time-nuts] Phase Noise Measurement in Dallas   Thomas Tammann
• [time-nuts] Re: Phase Noise Measurement in Dallas   Thomas Tammann
• [time-nuts] Re: Phase Noise Measurement in Dallas   Thomas Tammann
• [time-nuts] Re: BOAT   David Taylor
• [time-nuts] Re: looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   Greg Troxel
• [time-nuts] HP atomic clocks . The cesium tubes in them are no longer any good,   Lester Veenstra
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   Lester Veenstra
• [time-nuts] Re: Dr Kinali   Mathias Weyland
• [time-nuts] What time scale does IGS use to report its clock files?   Skip Withrow
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Skip Withrow
• [time-nuts] Re: BOAT ionospheric effects   Michael Wouters
• [time-nuts] Magnavox Operator's Manual, R—7220   marco bartoli
• [time-nuts] Trimble 4000 RL   marco bartoli
• [time-nuts] Re: WNRO fixup   marco bartoli
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   ew
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   jeanmichel.friedt at femto-st.fr
• [time-nuts] Re: BOAT   jeanmichel.friedt at femto-st.fr
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   vilgotch1 at gmail.com
• [time-nuts] Re: Ublox F9T tick to phase   stefan.hegnauer at gmx.ch
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   dk4ww at gmx.net
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   ghf at hoffmann-hochfrequenz.de
• [time-nuts] Do time nuts only use and measure 10MHz clocks?   cdelect at juno.com
• [time-nuts] Do time nuts only use and measure 10MHz clocks?   cdelect at juno.com
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   cdelect at juno.com
• [time-nuts] Stuff from Tom McCormicks estate   cdelect at juno.com
• [time-nuts] Re: Trimble 4000 RL   Bob kb8tq
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Bob kb8tq
• [time-nuts] Re: Use of dual frequency GPS for NTP server and other purposes   Bob kb8tq
• [time-nuts] Re: Hybrid analog digital dual stage DMTD based on nanoVNA HW. Getting closer to 1e-13 frequency resolution   Bob kb8tq
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   Bob kb8tq
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   Bob kb8tq
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   Bob kb8tq
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good, {External}   Bob kb8tq
• [time-nuts] Re: Dr Kinali   Bob kb8tq
• [time-nuts] Re: looking for multi-constellation GNSS nav receiver with bluetooth or WiFi interface   Bob kb8tq
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Bob kb8tq
• [time-nuts] Re: 3-Cornered Hat fails with negative variances, is there anything I can to to improve?   Bob kb8tq
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   Bob kb8tq
• [time-nuts] Re: Reducing time-interval noise with RNCAN PPP?   Bob kb8tq
• [time-nuts] Re: What time scale does IGS use to report its clock files?   Bob kb8tq
• [time-nuts] BOAT   Bob kb8tq
• [time-nuts] Re: BOAT   Bob kb8tq
• [time-nuts] Re: BOAT ionospheric effects   Bob kb8tq
• [time-nuts] Re: BOAT ionospheric effects   Bob kb8tq
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Bob kb8tq
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Bob kb8tq
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Bob kb8tq
• [time-nuts] Re: Phase Noise Measurement in Dallas   Bob kb8tq
• [time-nuts] Re: Phase Noise Measurement in Dallas   Bob kb8tq
• [time-nuts] Re: Phase Noise Measurement in Dallas   Bob kb8tq
• [time-nuts] Re: What phase variations to expect in a DMTD due to temperature fluctuations?   Bob kb8tq
• [time-nuts] Re: Phase Noise Measurement in Dallas   Bob kb8tq
• [time-nuts] Re: Hybrid analog digital dual stage DMTD based on nanoVNA HW. Getting closer to 1e-13 frequency resolution   hugen at outlook.com
• [time-nuts] Re: Windows 11 and PCI-e card for COM/LPT   paul swed
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   paul swed
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good,   paul swed
• [time-nuts] Re: HP atomic clocks . The cesium tubes in them are no longer any good, {External}   paul swed
• [time-nuts] Re: Dr Kinali   paul swed
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   zfe
• [time-nuts] Re: Do time nuts only use and measure 10MHz clocks?   zfe

Last message date: Mon Oct 31 16:45:49 UTC 2022
Archived on: Wed Nov 2 17:32:09 UTC 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...